Bushnell Telescope 78 2061 User Manual

Lit. #: 91-0220/03-01  
20-60 x 60mm Vari-Power  
Spotting Scope  
1. MOUNTING  
Remove the spotting scope and tripod from the box. Screw  
the tripod attachment screw into the tripod boss on the spot-  
ting scope. Spread the tripod legs and set on a solid surface.  
Model # 78-2061  
2. CONTROLS  
The spotting scope is focused with the focus ring. The tube  
with the vari-power ring and the eyepiece will move “in” and  
“out” depending on the direction the ring is turned. When  
the tube is all the way “out,” the spotting scope is at its clos-  
est focus position.  
5. CAUTION  
Never disassemble your spotting scope or tripod. Special tools  
and equipment are required for service and irreparable dam-  
age can result from untrained attempted service.  
Unauthorized service may also void the Warranty.  
The magnification is changed by rotating the vari-power ring.  
It will be necessary to re-focus when the magnification is  
changed.  
The spotting scope is positioned, on the tripod with the ele-  
vation and horizontal control. To adjust where the scope is  
pointing, rotate the handle counter clockwise. To lock, rotate  
the handle clockwise.  
WARRANTY/REPAIR  
3. USE  
Remove the dust caps. Point the spotting scope as desired –  
as described in section 2.  
CAUTION: DO NOT LOOK AT THE SUN THROUGH THIS  
SPOTTING SCOPE AS SEVERE EYE DAMAGE MAY RESULT.  
Set the vari-power ring at the lowest power (20x). Focus the  
spotting scope as described in section 2. Increase the power,  
and re-focus. Please note, however, that at the highest pow-  
ers the image may not appear sharp, because of several caus-  
es. First, the image will become less bright, second, all distur-  
bances and contaminations in the air will be emphasized, and  
last, all motion and vibration of the spotting scope and sup-  
port will also be magnified.  
IN CANADA Send To:  
Bushnell Performance Optics  
25A East Pearce Street, Unit 1  
Richmond Hill, Ontario L4B 2M9  
4. CARE  
The lenses of your spotting scope are 100% hard magnesium  
fluoride coated for highest light transmission. As with any  
optical coating, special care must be taken in cleaning the  
lenses. A Lens Cleaning Kit is recommended. Moisten surface  
of lens slightly and wipe dry using a circular motion starting  
at center of lens. Wipe or brush off any dirt or dust on the  
outside of spotting scope and tripod.  
 

Belson Hair Dryer CM2938 User Manual
Black Box TV Converter Box IC1474A F User Manual
Black Decker Cordless Drill AST1 User Manual
Black Decker Slow Cooker SL5385C User Manual
Bookendz Laptop Docking Station BE 10309 User Manual
Bosch Appliances Digital Camera 0X35 User Manual
Casio Musical Instrument AP 500 User Manual
CDA Range RV 701 SS User Manual
Chauvet TV Mount CBB 6 User Manual
Chief Manufacturing Indoor Furnishings LCD2C User Manual